Variants
- Single Disposable Pressure Transducer Kit
- Double Disposable Pressure Transducer Kit
- Triple Disposable Pressure Transducer Kit
Disposable Pressure Transducer Kit for Haemodynamics (HDM-DPT)
- A DPT (Disposable Pressure Transducer) is indicated for pressure sensing during clinical invasive procedures without interfering with the patient’s blood flow and /or blood pressure.
- The sensor is in fluid communication with different body fluids.
- By mechanical connection the pressure is transferred to the sensing unit, which translates it to an electrical signal.
- The stopcock is used for zeroing the pressure monitor before operation.
- The flush device allows a continuous flow which is required for flushing blood from the monitoring line when connected to the patient assembly.
- Complete DPT Kit consists of the Following: Disposable Pressure Transducer with inbuilt Flush, Pressure Monitoring Lines, Stopcock, Infusion Set, Dead Ender Caps.
Disposable Pressure Transducer Kit for Haemodynamics (HDM-DPT)
- A DPT (Disposable Pressure Transducer) is indicated for pressure sensing during clinical invasive procedures without interfering with the patient’s blood flow and /or blood pressure.
- The sensor is in fluid communication with different body fluids.
- By mechanical connection the pressure is transferred to the sensing unit, which translates it to an electrical signal.
- The stopcock is used for zeroing the pressure monitor before operation.
- The flush device allows a continuous flow which is required for flushing blood from the monitoring line when connected to the patient assembly.
- Complete DPT Kit consists of the Following: Disposable Pressure Transducer with inbuilt Flush, Pressure Monitoring Lines, Stopcock, Infusion Set, Dead Ender Caps.
- Variants
- Features & Benefits
- Material Specifications
- Technical Specifications
- Packing Details
- Download Brochure
Features & Benefits
- Straight, flow through design, where the fluid is passed across the pressure sensor through a thin capillary tube.
- Linear fluid pathway for ease of priming, debubbling and flushing
- Components that simplify setup.
- 3cc or 30cc per hour flow rates.
- Pre calibrated sensors for accurate readings during pressure monitoring
- End connectors are compatible with all standard ibp cable fitments.
- Available in single double and triple kit configurations
- The transducer can easily be mounted on either the patient, bed or iv pole with a variety of interface cables available, the Accu+ DPT kit can be connected to most types of monitors.
Material Specifications
Polycarbonate, Silicon, PVC, Glass, MEMS Sensor
Technical Specifications
| Parameters (MEMS Sensor) | Standard Range |
| Operating Pressure in mmHg | 0 to (+)300 mmHg |
| Operating Temperature range | 15° to 40°C |
| Storage Temperature range | (-)250 to (+)850 C |
| Zero Offset | (±)25 mm Hg |
| Zero Thermal Drift | (±)0.3 mm Hg/°C |
| Calibration requirement | 100 ± 3 |
| Sensitivity | 4.95 to 5.0μ V/V/mm Hg |
| Excitation Impedance | 330 ohms ± 10% |
| Overpressure Tolerance | (-)400 to (+)5000 mm Hg |
| Pressure Accuracy | Exceeds AAMI specifications: ANSI/AAMI BP22-1994/(R)2006 |
| Flow rate across flush device with IV bag pressurized to 300 mm Hg | 3 cc /hr |
| Operating Range | Non-linearity ± 1.5% of reading |
| Nonlinearity and Hysteresis of sensor | -1.5 to 1.5 %VFSS |
Packing Details
| Primary pack | PET Tray with Tyvec lid |
| Secondary pack | NA |
| Tertiary pack | Box quantity: 50 |
Download Brochure
- Marketing Brochure
- Instructions For Use